The 6700 may be configured to operate as a:
The 6700 operates like a 5000 indicator except that the weight information does not come from the load cell interface but from serially transmitted readings.
DIN standard housing – Allows for the unit to be readily mounted into standard DIN cutouts, reducing modifications to the units they are being installed into.
Analogue Output – 4-20mA or 0-10V with 1/65,000 resolution
High current outputs – Reduces wiring and the need for external relays, saving installation cost and reducing overall system size.
Isolated outputs – Eliminates the possibility of the external control systems influencing the weighing process, therefore simplifying system design and installation.
Robust I/O – Reduces unplanned outages due to component failure and reduced life time costs for the installation.
Wide DC operating range – Eliminates the need for third party power supplies saving on system complexity and cost.
Summing Master Mode
The 6700 acts as a master controller for a number of slave 5000 units connected together on a multi-drop serial RS422/RS485 bus.
- The 6700 polls each of the slave units and sums all of the weight readings.
- The resulting total weight is displayed on the 6700.
The set pointing and printing facilities and accessory cards are all driven from the total weight so the 6700 behaves like an indicator reading the total weight directly from the load cell base.
- Serial summing with 5000 indicators
- Master/slave mode to 5000 indicators
- Unit addressing up to 31 addresses
- Programmable input string
- High contrast LED display