Iconix FX1 Digital Indicator


The Iconix FX1 Digital Indicator is the entry level electronic weighing system from Iconix. Simplicity itself – just turn it on and “you’re weighing”. The Iconix FX1 Digital Indicator has a weatherproof case rated to IP65. The Iconix FX1 Digital Indicator with Iconix FX load bars can be used for livestock weighing.
There are two weighing modes: FREE for weighing static loads, such as produce, and HOLD for livestock weighing – after a press of the WEIGH key, the accurately averaged weight of the animal is locked on the display until the next animal is weighed.



  • Auto zero at switch-on
  • Intelligent zero-tracking. Dirt build-up while weighing is automatically zero-tracked out.
  • Tough, weatherproof case rated to IP65
  • Mounting bracket is included
  • Powered by external 12V battery – battery lead supplied
  • Low battery indicator
  • Auto ‘low voltage’ shut down
  • Weighs up to 2000kg with standard load bars
  • Automatic scale base selection
  • Low battery indication


  • General purpose
  • Livestock
  • Produce


  • AC adaptor for mains operation
  • Mounting Bracket


  • Supply voltage = 11.5V to 19V DC
  • Low battery indication = 11.4V DC
  • Automatic scale base selection
  • Accuracy: +/- 0.5% of displayed reading +/- 1 division (where 1 division = 0.2kg, 0.5kg etc depending on weight range)
  • Temperature range = -5°C to +50°C
  • Dimensions = 195 x 180 x 52mm (excluding mounting bracket)
  • Weight = 0.9kg (including mounting bracket)
  • Auto ranging resolution. With standard 2000kg loadbar set:

0 –     20kg   0.1kg steps
20 –     50kg   0.2kg steps
50 –   200kg   0.5kg steps
200 –   500kg      1kg steps
500 – 2000kg      2kg steps

Request A Quote

    Your name

    Company name

    Your email address

    Your phone number


    Your message